I
noticed that my carpet has a stain resistant label on
it. Does that mean that it's stain-proof?
Though
most carpeting sold today is stain-resistant, it is not
stain-proof. Please read your warranty information
regarding manufacturer's disclaimers and limitations
on liability. We especially caution you against stains
from strongly colored natural dyes such as mustard,
herbal tea, vomit, certain residual stains and damage
from some tropical treatments after cleaning.
How can I prolong the life of my new carpeting?
The
best way to prolong the life of your carpet is by
frequent light vacuuming interspersed with a heavy
vacuuming. The frequency depends upon the amount of
traffic and dirt you experience. We recommend that you
use a quality vacuum with a rotating brush or beater
bar rather than suction only. Dirt left in carpets
acts as sandpaper, wearing down the pile and luster.
How often should I have my carpets cleaned?
We
recommend, as do most warranties, that your new carpet
be cleaned at least once a year by a professional
carpet cleaner. Clean Carpets of New England hot water
truck-mounted water extraction process is recommended
by all the major carpet manufactures. We assure you
that frequent professional cleaning prolongs the life,
sheen and vitality of your carpet.
What the best way to remove stains from my carpeting?
For
common food or beverage spills follow the five step cleanup
listed below.
The
Five Step Cleanup
For most common food and beverage
spills |
|
What you need:
 |
-
A Scooping utensil
- Clean white towel or absorbent
cloth
- A sponge
- A bucket of cold water
- Non-bleach mild colorless
detergent
- A heavy weight or press
|
| 1.
Scoop up as much of
the spill as possible. Blot
the excess with a clean white
towel or paper towel. Don't
rub! (Blot from the outer edge
toward the center to keep
spill from spreading.)
Continue to blot until the
spill is removed. |
| 2.
Using a clean white
towel, apply cold water to
stain. Gently rub deep into
pile from left to right and
right to left. Blot until dry. |
| 3.
If the stain remains, apply a
solution of water and mild
non-bleach detergent (one
table spoon to one quart of
water) over the entire stain
and to the bottom of the pile.
Blot. |
| 4.
Rinse with cold water until
all the detergent is removed.
Gently rub deep into the pile
from left to right and right
to left. Blot thoroughly until
no longer soapy and to prevent
bacterial growth. Repeat steps
2, 3 and 4 until the stains is
gone. |
| 5.
Absorb the remaining moisture
with a few layers of clean
white cloth or towels weighted
down for several hours. When
carpet is dry, vacuum to
restore the textures. |
|
|
|